NEC NEAX 2000, Руководство по программированию

Страница: 897 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 115
Revision 1.0
(1/2)
CHOICE OF NIGHT SERVICE
GENERAL DESCRIPTION
This service feature allows an Attendant to change incoming C.O. terminating method on either mode
of day and night according to necessity while the system is operating on line mode.
The change of day and night mode can be performed by depressing
NIGHT
key on Attendant Console.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To change incoming C.O. terminating method from DESK CONSOLE:
1. Depress idle
LOOP
key.
2. Dial feature access code for CHOICE OF NIGHT SERVICE.
3. Dial “0”.
4. Dial
0/1 + XXX .
Day/Night Trunk No.
5. Depress
ANSWER
key.
Display XXX XX
Trunk No. Existing Data of incoming C.O.
terminating method
6. Dial XX + XXX .
incoming C.O. Trunk No.
terminating method code (Note)
7. Depress
START
key.
8. With the same operation from 4 performed, it can be continuously changed every Trunk Number.
To change incoming C.O. terminating method from SMART CONSOLE:
1. Depress idle
LOOP
key.
2. Depress
PROG
key.
3. Dial password (1-8 digit(s)).
4. Depress
CHN/S (CHOICE OF NIGHT SERVICE)
key.
5. Dial 0/1 + XXX .
Day/Night Trunk No.
6. Dial incoming C.O. terminating method code (Note)
7. Depress
ANS
key.
8. Depress
CNCL
key.
9. With the same operation from 6 performed, it can be continuously changed every Trunk Number.