NEC NEAX 2000, Руководство по программированию

Страница: 21 / 1200

INTRODUCTION
PURPOSE/OUTLINE OF THIS MANUAL
– 1 –
A2001-10
INTRODUCTION
PURPOSE
This manual explains the feature programming and hardware requirements for each business
and hotel service feature in the NEAX2000 IVS
2
/NEAX7400 ICS M100MX/NEAX2000 INTE-
GRATED VOICE SERVER.
OUTLINE OF THIS MANUAL
This manual consists of 2 chapters and 4 appendixes. The contents of Chapter 1 to Chapter 2
and Appendix A to D are outlined below.
CHAPTER 1 BUSINESS FEATURES
This chapter explains the programming procedure and hardware requirements for Business Fea-
tures in this system.
CHAPTER 2 HOTEL FEATURES
This chapter explains the following information related to the Hotel System and Property Man-
agement System (PMS).
•
System configuration for the Hotel System and the Property Management System (PMS)
•
Hardware requirement
•
Programming procedure of the Hotel features
•
Programming procedure of the Property Management System interface
APPENDIX A TERMINAL KEY ASSIGNMENT
This appendix contains the key number layout of each D
term
, ATTCON, DESKCON, DSS Con-
sole, and Add-On Module.
Refer to this appendix to assign a key function by CM90 or CM97 in Chapter 1 and Chapter 2.
APPENDIX B CHARACTER CODE TABLE
This appendix contains the character code table to set a station name displayed on D
term
or At-
tendant Console.
APPENDIX C D
term
TIMS JOB SPECIFICATIONS
This appendix explains the job specifications needed to apply the D
term
TIMS feature.