![background image](http://html.mh-extra.com/html/nec/neax-2000/neax-2000_programming-manual_251364951.webp)
ND-91285-001(E)
DECEMBER, 1999
Page 169
Revision 1.0
(1/2)
FAX ARRIVAL INDICATOR-D
term
GENERAL DESCRIPTION
When a call from a C.O. line (DIRECT-IN TERMINATION, DIRECT INWARD DIALING), station
or Tie Line has terminated to a facsimile machine, a related lamp on a predesignated D
term
is caused to
light, indicating reception of a facsimile call. The lamp indications are as follows:
STATION APPLICATION
All D
term
s
OPERATING PROCEDURE
To turn off the facsimile call lamp, depress the
FACSIMILE INCOMING CALL
key.
SERVICE CONDITIONS
Note:
In the following service conditions, the term facsimile station refers to the actual facsimile
machine single line station number. Facsimile call station refers to the button assignment on the
D
term
.
1. The number of facsimile station numbers and facsimile call station numbers that can be assigned varies
with each of the following cases:
a. When HOT LINEs are used to implement this feature, a maximum of 100 facsimile stations can be
assigned. In addition, a maximum of 100 facsimile call stations can be assigned.
b. When HOUSE PHONE groups are used to implement this feature, a maximum of four facsimile
stations can be assigned. In addition, there is no limit to the number of facsimile call stations that
can be assigned to each facsimile station.
2. Termination of a facsimile call is indicated on the lamp of the flexible line key to which a facsimile call
station number is assigned.
3. This feature does not indicate a call termination on the LCD.
4. One facsimile call number can be assigned to flexible line keys of multiple D
term
sets.
STATUS
INDICATION
Receiving
Receiving End
Not Receiving/Clear
Lamp (red); 120-ipm flash
(The chime beeps on start of message reception)
Lamp (red); Steady Lighting
Lamp; Off
Содержание NEAX 2000
