NEC NEAX 2000, Руководство по программированию

Страница: 1182 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 400
Revision 1.0
(2/4)
VOICE MAIL INTEGRATION (CONT’D)
OPERATING PROCEDURE (CONT’D)
To set CALL FORWARDING - ALL CALLS / -BUSY LINE / -DON’T ANSWER to a VMS:
1. Go off hook and receive Dial Tone.
2. Dial the call forwarding feature access code and receive Special Dial Tone.
3. Dial the voice mail station number and receive Service Set Tone.
The LCD displays “
SET xxxx
” (where
xxxx
is Voice Mail station number)
Connection when a station line number whose call forwarding is set to a voice mail system is called from
another station:
1. Go off hook and receive Dial Tone.
2. Dial the desired station number and receive Ringback Tone.
The LCD displays “
CF ALL xxxx
” (where
xxxx
is Voice Mail station number)
3. Follow the instructions given by the VMS.
To retrieve a voice mail message from the VMS:
1. Go off hook and receive Dial Tone.
2. Dial the Voice Mail station number or the MESSAGE WAITING/MESSAGE REMINDER retrieve
code and receive Ringback Tone.
The LCD displays “
xxxx
” (where
xxxx
is Voice Mail station number)
3. Follow the instructions given by the VMS.
To transfer a call to a VMS by one touch access, from a Single Line Telephone:
1. While answering an external call, press the
FLASH
key (or momentarily press the hook switch)
and receive a feature dial tone.
2. Dial a desired station number and receive a ringback tone or a busy tone.
3. Dial “9” or press a function key assigned for transferring a call to a VMS.
4. Restore the handset.
To transfer a call to a VMS by one touch access, from a D
term
:
1. While answering an external call, press the Transfer key and receive a feature dial tone.
2. Dial a desired station number and receive a ringback tone or a busy tone.
3. Dial “9” or press a function key assigned for transferring a call to a VMS.
4. Restore the handset.
To transfer a call to a VMS by one touch access, from an Attendant:
1. While answering an external call, dial a desired station number and receive a ringback tone or a
busy tone.
2. Dial “9” or press a function key assigned for transferring a call to a VMS.
3. Press the
RELEASE
key.
To transfer a Camp-on call from an Attendant to a VMS:
1. While answering an external call, dial a desired station number and receive a busy tone.
2. Press the
RELEASE
key.
3. A Camp-On tone is sent and Camp-On is set.
4.
If the Camp-On call is not answered by predetermined time, the call will be automatically trans-
ferred to the VMS.
5. Press the
RELEASE
key.