NEC NEAX 2000, Руководство по программированию

Страница: 136 / 1200

CALL INFORMATION SYSTEM (CIS)
PROGRAMMING
Flat Rate/Fixed Charge Programming
– 116 –
A2107-10
Flat Rate/Fixed Charge Programming
When the battery reversal signal arrives as an answer signal or no answer signal, and when the
C.O. outgoing call charge with the flat rate is required, do the following programming.
DESCRIPTION DATA
Assign the charging rate (Flat Rate) for Lo-
cal Call, Toll Call. (1)
(2) 40-49: Flat Rate No. 0-9
0 -9999: Charging rate
NOTE:
In case of no charge (Free of
Charge), no data assignment
is required.
Assign the charging method development
table number to outgoing trunk route. (1)
(2) 00-63: Trunk Route No.
000 -511: Development table No.
Assign the charging method to each dialed
digit. (1)
(2)
XXX Y
XXX: 000-511: Development table No.
Y
: 0-9, A (*), B (#): Dialed digit
X Y
X: 0-9: Flat Rate No. assigned by
CMD004
Y: 6: With answer signal
A: No answer signal
START
CMD004
END
CMD026
CMD027