NEC NEAX 2000, Руководство по программированию

Страница: 508 / 1200

STATION MESSAGE DETAIL RECORDING (SMDR)
PROGRAMMING
SMDR with AP00 Programming
– 488 –
A2486-10
DESCRIPTION DATA
Specify the timing of SMDR valid call timer
(pseudo-answer timer).
•
(1)
(2)
Y=0
03
00-08: 8 sec.-40 sec.
(4 sec. increments)
If no data is set, the default setting is
20-24 sec.
Specify the contents of the detail call infor-
mation to be sent to the SMDR. (1)
(2) 60
0 : Only the called party’s No. is sent
1 : Access Code is sent with the
called party’s No.
Specify the Advice of Charge (AOC).
[Australia Only]
(1)
(2) 176
0 : No
1 : Yes
Specify whether ISDN call charge informa-
tion is sent to the SMDR terminal.
[Australia Only]
(1)
(2) 68
0 : Not sent
1 : To send
Specify whether call start year and call
end year are sent to the SMDR terminal.
[Australia Only]
(1)
(2) 238
0 : Not sent
1 : To send
Specify the condition code 1/2 for Advice
of charge in SMDR NEAX2400 IMS For-
mat.
[Australia Only]
(1)
(2) 276
0 : Condition Code 1 is 1 cent unit.
Condition Code 2 is 0. 1 cent unit.
1 : Condition Code 1 is 0. 1 cent unit.
Condition Code 2 is 1 cent unit.
Specify the measured rate.
Use first data: 69 for dollar/franc, and use
first data: 70 for cent/centime.
By this setting, the call charge is calculat-
ed according to the message rate sent
from the network, and is sent to the SMDR
terminal (NEAX2400 IMS Format, charac-
ter 118-124) as AOC, when CMD000>68
is sent to “1”.
[Australia Only]
(1)
(2)
(1)
(2)
69 (dollar/franc)
00-99: 00-99 dollars/franc
70 (cent/centimes)
00-99: 00-99 cents/centimes
CMD000
CM42
CM41
A
B