NEC NEAX 2000, Руководство по программированию

Страница: 884 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 102
Revision 1.0
(1/1)
CALL TRANSFER - ALL CALLS
GENERAL DESCRIPTION
This service feature permits a station user to transfer incoming or outgoing C.O. and intraoffice calls to
another station within the system without Attendant assistance.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To transfer a call in progress:
1. While connected with the first party, momentarily depress the hookswitch; receive Special Dial
Tone.
2. Dial third party; receive Ringback Tone.
3. At this point, the station user can either:
a. Hang up before the third party answers. The first and third parties will be connected when
third party answers.
b. Wait for the third party answer and announce transfer while keeping the first party in a CON-
SULTATION HOLD - ALL CALLS condition. When the station user hangs up, the first and
third parties will be automatically connected.
SERVICE CONDITIONS
1. The station performing the CALL TRANSFER can drop off the connection before the called party
answers. If the called station does not answer within the predetermined time, ring signal is returned to
the transferring station. See VARIABLE TIMING PARAMETERS feature for other selectable timing
choices.
2. In the case of outgoing calls, this feature may be activated only after the last digit is sent.
3. The THREE-WAY CALLING feature can comprise not more than three parties on one connection.
The three parties connected can be as follows:
a. Three stations
b. Two stations and one trunk
c. One station and two trunks
4. The maximum number of simultaneous THREE-WAY CALLING connections per the system is 16.