NEC NEAX 2000, Руководство по программированию

Страница: 1159 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 377
Revision 1.0
(1/2)
TRUNK LINE APPEARANCE - D
term
GENERAL DESCRIPTION
This service feature allows D
term
users the ability to access a C.O. Line or Tie Line without dialling an
access code. For this feature, trunks must be assigned to the line keys on the D
term
. Incoming calls on C.O.
Lines can be answered on the appropriate TRUNK LINE APPEARANCE.
STATION APPLICATION
All D
term
s
OPERATING PROCEDURE
To make an outgoing call:
l. Depress the desired line key.
2. Lift the handset or depress the
Speaker
key and wait for Dial Tone from the other end (C.O. or a
distant PBX).
3. Dial the desired number.
To answer an incoming call:
1. Depress the ringing line key.
2. Lift the handset.
3. Answer the incoming call.
To transfer an incoming call:
1. Depress the ringing line key, lift the handset, and answer the incoming call.
2. Depress the
Hold
key; receive dial tone. (No tone can be selected by system data.)
The line key blinks in red.
3. Dial the target station number for transferring the call by voice call or by ringing.
4. Restore handset before the target station answers.
The line key remains at held state and the ringing to the target station stops.
The target station can answer the held call by depressing the applicable line key on the D
term
.
OR
Depress
Transfer
key and restore handset.
The line key lights in red and the ringing to the target station goes on.
When the target station answers the ringing, the held call is connected to the target station.