NEC NEAX 2000, Руководство по программированию

Страница: 855 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 73
Revision 1.0
(1/2)
CALL FORWARDING - BUSY LINE - OUTSIDE
GENERAL DESCRIPTION
This service feature is an expansion of CALL FORWARDING - BUSY LINE, and allows a call which
originates from a station or trunk and is destined for a station to be routed to another station outside the
system via the appropriate trunk line. A maximum of 26 digits may be stored when this feature is activated
by the station user. When activated, a short burst of ringing is given to the original station line as a
reminder that CALL FORWARDING is activated.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To set CALL FORWARDING to an outside location:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - BUSY LINE - OUTSIDE access code (same as CALL FOR-
WARDING - BUSY LINE); receive Special Dial Tone.
3. Dial the trunk access code and the desired telephone number.
4. If forwarding is accepted, Service Set Tone will be heard.
5. If forwarding is denied; Reorder Tone will be heard.
To cancel CALL FORWARDING:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - BUSY LINE - OUTSIDE cancellation code (same as CALL
FORWARDING - BUSY LINE); receive Service Set Tone.
SERVICE CONDITIONS
1. Stations may be assigned this feature via CLASS OF SERVICE - INDIVIDUAL programming in sys-
tem data.
2. The forwarding station is recorded by STATION MESSAGE DETAIL RECORDING (SMDR) as the
originating station of calls that are forwarded when using this feature.
3. CALL FORWARDING data remains programmed even if the system is re-initialized or a power failure
occurs.
4. CALL FORWARDING - BUSY LINE - OUTSIDE calls can be restricted by each originating station’s
RSC.
5. Route Peg Count is utilized for CALL FORWARDING - BUSY LINE - OUTSIDE.
6. The maximum number of simultaneous service settings per system is 496 stations, including CALL
FORWARDING - ALL CALLS - OUTSIDE, BUSY LINE - OUTSIDE, DON’T ANSWER - OUT-
SIDE settings.
• MP without expansion memory (standard) : 240 stations
• MP with expansion memory (optional) : 496 stations