NEC NEAX 2000, Руководство по программированию

Страница: 925 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 143
Revision 1.0
(1/1)
DIALED NUMBER IDENTIFICATION SERVICE (DNIS)
GENERAL DESCRIPTION
This feature provides a display of the company name on the Attendant Console when the Attendant has
answered a Listed Directory Number (LDN) call or a Tie Line call.
STATION APPLICATION
DESK CONSOLE
SMART CONSOLE
OPERATING PROCEDURE
The Attendant answers an incoming call.
1.
SRC
,
LDN
(or
TIE
), and
ANS
key lamp lights.
2. Company Name, LDN Number, Trunk Number, and Trunk Identification Code are displayed as
follows:
SERVICE CONDITIONS
1. This service feature is effective when the Attendant at a SMART CONSOLE has answered an LDN
call or a Tie Line call.
2. The maximum number of characters per company name is 8.
3. The maximum number of company names assigned per system is 16 (Max. 8 for LDN calls and Tie
Line calls respectively). The company name can be assigned per trunk route basis.
4. The company name can be assigned by character code from the CUSTOMER ADMINISTRATION
TERMINAL (CAT), or MAINTENANCE ADMINISTRATION TERMINAL (MAT).
5. While the company name is displayed, the Attendant can transfer the call to a desired station by keying
the destination number on the keypad. In this case, the company name of the call cannot by displayed
again.
6. While the company name is displayed, the Attendant can place the present call on hold by depressing
the
HOLD
key. In this case, the company name of the call cannot be displayed again when the Attend-
ant returns to call on hold.
7. The company name can be displayed when the Attendant has answered the LDN call or Tie Line call
forwarded from the station. If the name display feature is assigned for that station, the station name is
displayed (the station name display has priority over the company name display).
0:00:01• •DDD• •1000• ••• G01 10:23• •AM• •TUE• •12
NEC• • • • • • • • • • <500>
Company Name LDN Number