NEC NEAX 2000, Руководство по программированию

Страница: 1101 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 319
Revision 1.0
(1/1)
SOFTWARE LINE APPEARANCE - D
term
GENERAL DESCRIPTION
This feature permits assignment of circuits which do not physically exist, to be used as secondary sta-
tions on a D
term
. There are 256 software lines that can be assigned to line keys and used as desired.
STATION APPLICATION
All D
term
s
OPERATING PROCEDURE
Normal call processing procedures apply.
SERVICE CONDITIONS
1. A SOFTWARE LINE APPEARANCE can be assigned as follows:
• HOT LINE
• INTERCOM
• STATION HUNTING pilot number
• UNIFORM CALL DISTRIBUTION phantom number
• Secondary appearance on D
term
• Pilot numbers for hunting groups and UNIFORM CALL DISTRIBUTION (UCD) groups.
2. When accessing the CALL PICKUP feature, the SOFTWARE LINE APPEARANCE assigned as a
secondary station can only pickup calls directed to the group programmed for that secondary station.
3. A SOFTWARE LINE APPEARANCE can enter or access the SPEED CALLING data on the station
of the same D
term
on which it appears.
4. All STATION MESSAGE DETAIL RECORDING (SMDR) data of the SOFTWARE LINE APPEAR-
ANCE will be recorded as activity on the primary station of the D
term
on which it appears, including
that on secondary station appearances.
5. When a real number (corresponding to an installed station) is not used as a pilot number for STATION
HUNTING or UCD groups, a software line can be used.
6. See INTERCOM, STATION HUNTING, UNIFORM CALL DISTRIBUTION and HOTLINE fea-
tures for details.
7. The system can support up to 384 D
term
s (up to 512 D
term
s with expansion memory of MP) and up to
256 SOFTWARE LINE APPEARANCE.
However, the combined total of D
term
s and SOFTWARE LINE APPEARANCES must not exceed 768.