NEC NEAX 2000, Руководство по программированию

Страница: 132 / 1200

CALL INFORMATION SYSTEM (CIS)
PROGRAMMING
D
term
TIMS Programming
– 112 –
A2107-10
DESCRIPTION DATA
Specify the measured rate, if franc/cen-
time required.
Use first data: 69 for dollar/franc, and use
first data: 70 for cent/centime.
By this setting, the call charge is calculat-
ed according to the message rate sent
from the network, and is sent to the D
term
TIMS printer.
(1)
(2) 69: dollar/franc
00-99: 00-99 dollars/franc
(1)
(2) 70: cent/centime
00-99: 00-99 cents/centimes
Specify the Printer Line Feed Code. (1)
(2) 103
0 : CR
1 : CR + LF
Assign the attribute data, depending on
the channel (Port 1 or 3) connected to the
printer. (1)
(2) See the following table.
See the following table.
CM42
CMD000
CMD001
B
AP00 INITIAL
FIRST DATA (1)
MEANING
SECOND
DATA (2)
MEANING
PORT
0
PORT
1
PORT
2
PORT
3
24 32 Data Speed 2/3/4 1200/2400/4800 bps
25 33 Stop Bit 2 2 bits
26 34 Data Length 0 7 bits
27 35 Parity 1 Even Parity
100 140 Equipment Type 16/17 Printer 0/Printer 1
102 142
No. of characters per
line to be printed out
2 80 characters
103 143 No. of lines per page 0-88
0 : No page
1 : No. of lines
including space
within a page
(Depends on size
88: of printer paper
used)
104 144
No. of lines per page
to be printed out 0-88 0 : No page
1 : No. of lines to be
printed out within
88: a page
~
~
C