NEC NEAX 2000, Руководство по программированию

Страница: 632 / 1200

FEATURES FOR OTHER COUNTRIES ONLY
MFC-INCOMING CALL/MFC-OUTGOING CALL
– 612 –
A2594-10
DESCRIPTION DATA
Assign the duration from sending start
Forward signal to receiving Backward sig-
nal, if required.
•
(1)
(2)
Y=B
00
01-31
: 1 sec.-31 sec.
NONE : 12 sec.
Assign the duration from detecting Back-
ward signal to receiving stop Backward
signal, if required.
•
(1)
(2)
Y=B
01
01-31
: 1 sec.-31 sec.
NONE : 12 sec.
Assign the connecting method when re-
ceiving Backward signal meaning Line
Busy/Unallocated number/Congestion. (1)
(2) 473
0/1
NOTE 1
Select whether the Sender Tone is sent or
not on DOD call. (1)
(2) 475
0/1
NOTE 1
Select whether the supervision of Pulse
Form signal is performed or not on DOD
call. (1)
(2) 478
0/1
NOTE 1
NOTE 1:
Refer to the “MFC Data As-
signment Table for Each
Country”.
page 615
Specify the originating method (sender
start operation).
By setting the data to “1”, you can quicken
the completion of the call origination.
•
(1)
(2)
Y=36
00-63: Trunk Route No.
0 : Originated after the last digit is di-
aled
1 : Originated without waiting until the
last digit is dialed
END
CM31
A
CM08
CM35
INITIAL
INITIAL
INITIAL