NEC NEAX 2000, Руководство по программированию

Страница: 1187 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 405
Revision 1.0
(3/4)
VOICE MESSAGE SYSTEM (CONT’D)
OPERATING PROCEDURE (CONT’D)
From a D
term
(including the LCD display on the D
term
):
1. Dial “8” or depress the function key of
the D
term
; receive service set tone for 3
seconds.
2. Record the message.
3. Message Waiting lamp is lit on the
called station (X = the number of mes-
sages) .
4. Restore the handset(XXX= Card No.).
From an Attendant Console:
1. Dial “8”; receive Service Set Tone for 3 seconds.
2. Depress the
RELEASE
key or
CANCEL
key.
To retrieve a message from a Single Line Telephone:
1. Lift the handset and receive Dial Tone.
2. Dial the Voice Message Waiting-Individual retrieve access code.
3. Listen to the message.
4. Restore the handset.
To retrieve a message from a D
term
:
1. Depress the
Speaker
key or lift the handset and receive Dial Tone.
2. Depress the
MSG
key.
3. Listen to the message.
4. Depress the
Speaker
key or restore the handset.
SERVICE CONDITIONS
1. Message Waiting status is displayed by the Message Waiting lamp on Single Line Telephones or D
term
.
2. The LC card is required to provide Single Line Telephones with the Message Waiting function. Single
Line Telephones must be equipped with Message Waiting lamps for 70VDC.
3. When multiple Message Waiting indications are initiated from various points (Attendant Consoles,
Front Desk Instrument, other stations, etc.), clearing one message will remove the Message Waiting
indication.
4. The flashing rate for the Message Waiting lamp on the D
term
is selected on a system-wide basis for 60
IPM or lit steady.
0:00:03 PLS WAIT
1:34 PM FRI 12 APR 1999
0:00:03 CARD#XXX
1:34 PM FRI 12 APR 1999
MSG X
1:34 PM FRI 12 APR 1999
REC COMPLETE XXX
1:34 PM FRI 12 APR 1999