NEC NEAX 2000, Руководство по программированию

Страница: 1100 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 318
Revision 1.0
(1/1)
SMART CONSOLE (SN716 DESKCON)
GENERAL DESCRIPTION
The SMART CONSOLE (SN716 DESKCON) operates on a switched-loop basis with a maximum of six
Attendant loops terminating on the associated Attendant Interface card at each console. The Attendant uses
these loops for answering, originating, holding, extending, and re-entering calls. When ATTENDANT
LOOP RELEASE is used, the number of loops is effectively increased to a maximum of 12 for each con-
sole.
STATION APPLICATION
SMART CONSOLE (SN716 DESKCON)
OPERATING PROCEDURE
The operating procedure for SMART CONSOLE (SN716 DESKCON) ia similar to the SMART CON-
SOLE (SN708/SN709/SN712). Some minor differences can be noticed with key placement and LED oper-
ation.
SERVICE CONDITIONS
1. Each Firmware Processor (FP) can support up to 8 SMART CONSOLES (SN716 DESKCON/SN708/
SN709/SN712 ATTCON). A maximum of 8 SMART CONSOLEs can be supported per system.
2. Each SN716 DESKCON uses a 3-pair cable.
3. The SN716 DESKCON is equipped with an Alarm LED. This LED will flash for Minor Alarms and
light steadily for Major Alarms. Refer to Maintenance Administration Terminal, Fault Messages for
more information. Refer to the following chart for cable distances.
4. Refer to the following chart for cable distances:
Note:
The SN716 DESKCON uses the PW00 card mounted in the PBX, or the D
term
75 AC/DC Adapter,
not both.
5. The SN716 DESKCON does not support the Lockout feature. Position Busy replaces the Lockout fea-
ture.
6. The system does not support Busy Lamp Field on the keypad.
7. The system does not support REC, EMG, TKSL, SVC, MODE key on the console.
8. The following key assignments are fixed and can not be changed by system programming:
PAGE, BV, CALL PARK, SC, START, MUTE
With PW00 With AC/DC Adapter
4 port DLC and 2DLCC 1000 feet (350 meters) 4000 feet (1200 meters)
8 port DLC 1000 feet (350 meters) 1000 feet (350 meters)