![background image](http://html.mh-extra.com/html/nec/neax-2000/neax-2000_programming-manual_251364797.webp)
ND-91285-001(E)
DECEMBER, 1999
Page 15
Revision 1.0
(2/2)
ANALOG PORT ADAPTER-D
term
(CONT’D)
OPERATING PROCEDURE (CONT’D)
To answer a call incoming to the subline from an analog terminal via the ANALOG PORT ADAPTER:
1. An analog terminal does not ring when a call terminates the Sub Line on the D
term
.
2. Press the line key of the Sub Line on the D
term
and lift the handset of the D
term
.
The LED of the Sub Line on the D
term
lights green.
3. Lift the handset of the analog terminal to switch over to the analog terminal.
4. Replace the handset of the D
term
.
5. Converse.
Dual Port mode:
An analog terminal connected via the ANALOG PORT ADAPTER can be used independently of the
D
term
.
Refer to the User’s Guide for each terminal as for operating procedure.
SERVICE CONDITIONS
1. The following analog terminal can be connected to the ANALOG PORT ADAPTER unit:
Single Port mode : Single Line Telophone (PB only), Facsimile, Modem without NCU.
Dual Port mode : Single Line Telephone (PB only), Facsimile, Modem with NCU.
(NCU: Network Connection Unit)
2. In Single Port mode, the D
term
and the analog terminal can not be used simultaneously. When the D
term
and the analog terminal goes off hook simultaneously, the analog terminal has precedence.
3. In Dual Port mode, the D
term
and the analog terminal can be used simultaneously.
4. A D
term
/analog terminal can not be identified on LED in Single Port mode. When the analog terminal
is in use the LED indication on the D
term
is as follows:
•
Single Port mode: The LED of the Prime Line lights green.
(Note)
•
Dual Port mode: The LED of the Sub Line lights red.
Note:
When answering the call incoming to Sub Line on the D
term
and switching over to the analog
terminal, the LED of the Sub Line lights green.
5. A D
term
/analog terminal can not be identified on the LCD of the D
term
in Single/Dual Port mode.
6. The ringing pattern is fixed as 1 sec. ON-2 sec. OFF. The distinctive ringing can not be provided for
Single/Dual Port mode.
7. In Dual Port mode, the analog terminal can not originate from the subline and can not answer the call
incoming to the Sub Line.
8. In Dual Port mode, it is not allowed to switch over from/to the D
term
to/from the analog terminal.
Содержание NEAX 2000
