NEC NEAX 2000, Руководство по программированию

Страница: 1086 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 304
Revision 1.0
(1/1)
SAVE AND REPEAT - D
term
GENERAL DESCRIPTION
This feature allows a D
term
to save a specific dialled number and then redial that number at a later time.
STATION APPLICATION
All D
term
s
OPERATING PROCEDURE
1. Go off-hook and seize any idle line. Dial a number.
2. After the number has been dialled, depress the
SAVE AND REPEAT
feature key. The dialled number
is stored for future use. The associated LED lights red.
3. To access this number later, go off-hook and receive Dial Tone. Depress the
SAVE AND REPEAT
key and the saved number is dialled.
SERVICE CONDITIONS
1. Three
SAVE AND REPEAT
keys per station can be assigned.
2. The SAVE AND REPEAT function may be set at any time after the number has been dialled and
before going on-hook.
3. It is not necessary to erase the stored number in order to save another. The second number will auto-
matically replace the first.
4. If necessary, dialling can be added after depressing the
SAVE AND REPEAT
key.
5. When a call is originated using the SAVE AND REPEAT feature, the LED associated with the
SAVE
AND REPEAT
key goes out. However, the memory is retained and that number can be accessed
again.
6. To monitor the saved digits, depress the
SAVE AND REPEAT
key while the station is idle. The saved
digits will be displayed if the D
term
is equipped with an LCD.
7. The trunk access code is saved along with the dialled number on a TRUNK LINE APPEARANCE.
This allows use of the SAVE AND REPEAT key on an extension.
8. The maximum number of digits that can be stored is 26.