NEC NEAX 2000, Руководство по программированию

Страница: 1173 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 391
Revision 1.0
(1/3)
VARIABLE TIMING PARAMETERS
GENERAL DESCRIPTION
This feature gives the system the versatility to change timing duration using the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) or the CUSTOMER ADMINISTRATION TERMINAL (CAT).
All timing parameters are set initially in the RESIDENT SYSTEM PROGRAM. These TIMING
PARAMETERs can be changed according to the customer’s requirements.
STATION APPLICATION
Not applicable.
OPERATING PROCEDURE
Refer to the Installation Procedure Manual/Feature Programming Manual for programming instructions.
SERVICE CONDITIONS
The Feature Programming Manual contains instructions on how to change the following timing durations:
1. Automatic Recall of ATTENDANT CAMP-ON and unanswered calls:
a. Standard timing: 31.2 - 33.6seconds
b. Variable timing: 2.4 - 124.8 seconds (2.4-second increments in 2.4 - 33.6 seconds
9.6-second increments in 38.4 - 124.8 seconds)
2. Elapsed time before CALL FORWARDING - DON’T ANSWER for incoming trunk calls or AUTO-
MATIC CHANGE OF NIGHT SERVICE activation:
a. Standard timing: 32 - 36 seconds
b. Variable timing: 4 - 120 seconds (4-second increments)
3. STATION MESSAGE DETAIL RECORDING (SMDR) valid call timer:
a. Standard timing: 20 - 24 seconds
b. Variable timing: 8 - 40 seconds
4. Disconnect recognition time for trunks:
a. Standard timing: 0.96 - 1.44 seconds
b. Variable timing: 0.48 - 6.72 seconds (0.48-second increments)
5. Recall timing for EXCLUSIVE HOLD - D
term
:
a. Standard timing: 236 - 240 seconds
b. Variable timing: 4 - 396 seconds (4-second increments)
6. Recall timing for NONEXCLUSIVE HOLD - D
term
and CALL PARK:
a. Standard timing: 60 - 64 seconds
b. Variable timing: 4 - 396 seconds (4-second increments)