NEC NEAX 2000, Руководство по программированию

Страница: 818 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 36
Revision 1.0
(1/1)
AUTHORIZATION CODE
GENERAL DESCRIPTION
An AUTHORIZATION CODE is a numerical code to be dialed by station users which will override the
station CLASS OF SERVICE-INDIVIDUAL for facility access restriction.
STATION APPLICATION
All stations
OPERATING PROCEDURE
1. Lift handset and receive Dial tone.
2. Enter feature access code and receive Service Set Tone.
3. Enter AUTHORIZATION CODE.
4. Receive Dial Tone.
5. Enter number to be called.
Note: Feature Access Code for AUTHORIZATION CODE will be max. 3 digits.
SERVICE CONDITIONS
1. AUTHORIZATION CODE limitations:
a. In the case of a system with AP01 card
• Number of digits; 1 digit-10 digits (If Check Code is provided, limited to 8 digits)
If Forced Account Code is utilized, the same number of digits must be
assigned to AUTHORIZATION CODE and FORCED ACCOUNT CODE.
• Number of codes: Up to 1,000 codes combined with FORCED ACCOUNT CODE and
REMOTE ACCESS CODE.
b. In the case of system without AP01 card
• Number of digits: 1 digit-8 digits
• Number of codes: The maximum number of codes depends on the numbering scheme and
digit number. For details, refer to APPENDIX 3.
2. AUTHORIZATION CODES are recorded in the STATION MESSAGE DETAIL SYSTEM - RS232C,
however, making of the AUTHORIZATION CODES is available if desired.
3. AUTHORIZATION CODES are assigned in system data from the MAINTENANCE ADMINISTRA-
TION TERMINAL (MAT) or the CUSTOMER ADMINISTRATION TERMINAL (CAT).
4. AUTHORIZATION CODE changes the CLASS OF SERVICE for that call only.
5. An AUTHORIZATION CODE can be assigned per a station number so that one code is used only on
the specification.