NEC NEAX 2000, Руководство по программированию

Страница: 748 / 1200

APPENDIX C D
term
TIMS JOB SPECIFICATIONS
PRINT OPERATIONS
– C20 –
A2C14-10
NOTE 1:
The data assignment for the station “Audit Display” operation are:
CMD000>16=1 (To be allowed the following operations)
REC + Station No. + RESET
REC + Station No. + SET
CMD000>121=1 (To be supervised whether the Interim-print has been executed or
not, on station “Call Record”)
CMD000>123=1 (To be cleared the Interim-printed “Call Record” data when station
“Audit Display” (REC + Station No. + RESET) has been performed)
NOTE 2:
The data assignment for the station groups “Audit Display” operation are:
CMD000>128=1 (To be allowed the following operations)
REC + GROUP + Group No. + RESET
REC + GROUP + Group No. + SET
CMD000>122=1 (To be supervised whether the Interim-print has been executed or
not, on station group “Call Record”)
CMD000>123=1 (To be cleared the Interim-printed “Call Record” data when station
group “Audit Display” (REC + GROUP + Group No. + RESET) has been per-
formed)
AP Memory Management
The AP memories are used for the following purposes:
• TIMS billing data, “Call Record” and “Totaled Bill” accumulation
• Printer port buffer (Store the data caused by printer’s ER (PIN 20) is off means that the print-
er is not ready.)
• SMDR port buffer (Including “SMDR text on PMS interface” buffer and “Centralized Billing -
CCIS” buffer)
A maximum of one thousand texts can be stored in the AP. The AP memories are divided into
previous three sections, and the storage threshold of each section can be specified.
When the number of texts in a section reaches the threshold, no new data is stored, and the ded-
icated warning message can be printed.
NOTE 1, NOTE 2, NOTE 3