NEC NEAX 2000, Руководство по программированию

Страница: 1112 / 1200

ND-91285-001(E)
DECEMBER, 1999
Page 330
Revision 1.0
(1/2)
SPLIT CALL FORWARDING - ALL CALLS
GENERAL DESCRIPTION
This feature allows all internal calls and external calls directed to a particular station to be rerouted to
different destinations individually, regardless of the busy or idle status of the station.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To activate SPLIT CALL FORWARDING feature, both SPLIT CALL FORWARDING and CALL FOR-
WARDING settings are required.
For CALL FORWARDING setting, refer to CALL FORWARDING - ALL CALLS feature.
From a D
term
with an LCD
To set SPLIT CALL FORWARDING - ALL CALLS:
1. Lift the handset or press
Speaker
key; receive Dial Tone.
2. Press the SPLIT CALL FORWARDING - ALL CALLS feature access key; receive Special
Dial Tone.
3. Dial the desired destination number (0-9); receive Service Set Tone.
DESTINATION NUMBER
0 : Target Station for SPLIT CALL FORWARDING - ALL CALLS (Block No.0)
1 :
(Block No.1)
2 : (Block No.2)
3 : (Block No.3)
4 : (Block No.4)
5 : (Block No.5)
6 : (Block No.6)
7 : Target Station for SPLIT CALL FORWARDING - ALL CALLS (Block No.7)
8 : Target Station for CALL FORWARDING - ALL CALLS
9 : SPEED CALLING - STATION
Note: Destination No. 0-7 is pre-assigned in system programming.
The associated LED lights and the LCD displays “
SET xxxx
” or “
SET OPR
” (where
xxxx
is
Target Station and OPR means Operator)
4. Replace the handset or depress
Speaker
key.
To cancel SPLIT CALL FORWARDING - ALL CALLS:
1. Lift the handset or press
Speaker
key; receive Dial Tone.
2. Press the CALL FORWARDING - ALL CALLS feature access key; receive Special Dial Tone.
The LCD displays “
CF ALL xxxx
” (where
xxxx
is Target Station)
3. Press the * key; receive Service Set Tone. The LED of the associated feature key will go out.
The LCD displays: “
CANCEL
”
4. Replace the handset or press
Speaker
key.