![background image](http://html.mh-extra.com/html/nec/neax-2000/neax-2000_programming-manual_2513641091.webp)
ND-91285-001(E)
DECEMBER, 1999
Page 309
Revision 1.0
(1/2)
SET RELOCATION
GENERAL DESCRIPTION
This feature enables two stations to be moved from one location to another without reprogramming
station data at MAINTENANCE ADMINISTRATION TERMINAL (MAT).
STATION APPLICATION
From D
term
to D
term
From Single Line Terminal to Single Line Terminal
OPERATING PROCEDURE
To move Station-A to Station-B:
1. Station-A lifts handset; receive Dial Tone.
2. Dial Authorization Code access code; receive Special Dial Tone.
3. Dial Authorization Code for changing station class temporarily; receive Dial Tone.
4. Dial Set Relocation access code; receive Special Dial Tone.
5. Dial Station-B number; receive Service Set Tone and LCD displays “
SWAP OK xxxx
” (where
xxxx
is Station-B number)
6. Restore the handset; After four seconds, data between Station-A and Station-B will be exchanged.
SERVICE CONDITIONS
1. This feature can move D
term
to D
term
, or Single Line Terminal to Single Line Terminal.
The following cases are not available;
•
Single Line Terminal
↔
D
term
•
PS
↔
PS/Single Line Terminal/D
term
However, the following cases are available
(Note)
;
•
Single Lie Terminal (DP)
↔
Single Line Terminal (PB)
•
Between D
term
s with different line button number
Note:
In this case, telephone sets also should be changed.
2. When the station has the following features, it can not be moved;
•
Single Line Terminal equipped with DSSCON
•
D
term
equipped with Add-On-Module
•
D
term
equipped with APR
•
D
term
equipped with Dual Path
In this case, when dial Set Relocation access code, receive restrict ROT.
3. The following services can not be moved;
•
STACK DIAL
•
LAST NUMBER REDIAL
•
SAVE AND REPEAT
Содержание NEAX 2000
