Mitsubishi Electric MELSERVO-J3W Series, Инструкция по эксплуатации

Страница: 109 / 500

5. PARAMETERS
5 - 22
Setting Output item Description Setting Output item Description
4 Current command
Max. current command
(Max. torque command)
CW direction
CCW direction
Max. current command
(Max. torque command)
0
8[V]
-8[V]
5 Speed command
Max. speed
CW direction
CCW direction
Max. speed
0
8[V]
-8[V]
6 Droop pulses
(Note 1, 2, 3)
( 10V/100 pulses)
100[pulse]
CW direction
CCW direction
100[pulse]
0
10[V]
-10[V]
7 Droop pulses
(Note 1, 2, 3)
( 10V/1000 pulses)
1000[pulse]
CW direction
CCW direction
1000[pulse]
0
10[V]
-10[V]
8 Droop pulses
(Note 1, 2, 3)
( 10V/10000 pulses)
10000[pulse]
CW direction
CCW direction
10000[pulse]
0
10[V]
-10[V]
9 Droop pulses
(Note 1, 2, 3)
( 10V/100000 pulses)
100000[pulse]
CW direction
CCW direction
100000[pulse]
0
10[V]
-10[V]
D Bus voltage
400[V]
0
8[V]
E Speed command 2
(Note 2, 4)
Max.
CW direction
CCW direction
Max. speed
0
8[V]
-8[V]
Note 1. Encoder pulse unit.
2. Cannot be used in the torque loop mode.
3. Cannot be used in the speed loop mode.
4. This setting can be used with the servo amplifier whose software version is B3 or later and with MR Configurator whose software
version is C5 or later.