Mitsubishi Electric MELSEC Q Series, Руководство пользователя

Страница: 665 / 834

13 - 61
Chapter 13 Control Sub Functions
1: The torque limit setting value or torque output setting value becomes effective at the PLC READY signal [Y0] rising edge
(however, after the servo turned ON.)
2: The torque limit setting value or torque output setting value becomes effective at the positioning start signal [Y10] rising edge,
and the torque limit value is updated.
3: The torque change value is cleared to "0" at the positioning start signal [Y10] rising edge.
4: The torque limit value is changed by the torque changed value.
5: When the new torque value is 0, a torque change is considered not to be carried out.
6: When the change value is exceeds the torque limit value, a torque change is considered not to be carried out.
Each operation
PLC READY signal [Y0]
All axis servo ON [Y1]
Start signal [Y10]
Torque limit setting
value
Torque output setting
value
New torque value/
forward new torque
value
Torque limit stored value/
forward torque limit
stored value
Pr.17
Cd.101
Cd.22
Md.35
1
300 250
0 100 150
0 200 0 350 0 75 230 0
0 300 300 200 100 75 230 150
1
2
2 2
3 3 4
4
4
3
6 5
Torque change function
switching request
Cd.112
0
New
reverse torque
value
Reverse torque limit
stored value
Cd.113
Md.120
0 120 0 320 0 200 80 0
0 300 300 120 100 200 80 150
3 3 4
4
4
3
6 5
1 0
Fig. 13.32 Torque change operation (forward/reverse torque limit value individual setting) (Axis 1)
[2] Precautions during control
(1) If a value besides "0" is set in the new torque value, the torque generated by
the servomotor will be limited by the setting value. To limit the torque with
the value set in "[Pr.17] Torque limit setting value" or "[Cd.101] Torque
output setting value", set "0" to the new torque value.
Setting value of
"[Cd.112] Torque change function switching
request"
Setting item (New Torque value)
0: Forward/reverse torque limit value
same setting
[Cd.22] New torque value/forward new torque value
1: Forward/reverse torque limit value
individual setting
[Cd.22] New torque value/forward new torque value
[Cd.113] New reverse torque value