Mitsubishi Electric MELSEC Q Series, Руководство пользователя

Страница: 175 / 834

5 - 55
Chapter 5 Data Used for Positioning Control
[Pr.48] HPR retry [RJ010 mode]
Set whether to carry out HPR retry.
When the HPR retry function is validated and the machine HPR is started, first the
axis will move in the HPR direction (1)). If the upper/lower limit signal turns OFF
before the proximity dog signal ON is detected (2)), the axis will decelerate to a
stop, and then will move in the direction opposite the HPR direction (3)). If the
following edge of the proximity dog signal is detected during movement in the
opposite direction, the axis will decelerate to a stop (4)), and then will carry out
machine HPR again (5), 6)).
ON
Start position
Proximity dog signal
Limit signal OFF state
Zero signal
5)
4)
6)
1)
2)
3)
[Operation for HPR retry function]
1) Movement in the HPR direction starts with the machine HPR start.
2) The axis decelerates when the limit signal OFF is detected.
3) After stopping at detection the limit signal OFF, the axis moves at the HPR speed in the
direction opposite to the specified HPR direction.
4) The axis decelerates when the proximity dog signal turns OFF.
5) After stopping with the proximity dog signal OFF, start machine HPR in the HPR
direction.
6) The machine begins decelerating when the proximity dog ON is detected and completes
machine HPR.