Beckman Coulter Navios, Инструкция по эксплуатации

Страница: 85 / 586

773232AH
4-13
Specifications
Software Specifications
4
@PnDivider Specifies the channel of the parameter n prism divider. Only present when the prism
dividers are specified in the software.
@PnGAIN Amplifier Gain setting of a sensor associated with parameter n.
@PnQ Sensor name for parameter n, from the Cytometer Control screen.
@PnU Units for this parameter n.
@PnX Linear calibration values in xx, yy order, for example: xx= channel number, yy =
channel value. When this value is “0.0, 0.0” the resolution of the data is used.
@PnZ Calibration for parameter n is active. This value is always “ON”.
@RATIO_DENOMINATOR Name of Parameter used as Ratio Denominator or “N/A” if ratio is not selected.
@RATIO_NUMERATOR Name of Parameter used as Ratio Numerator or “N/A” if ratio is not selected.
@RATIODENOMINATORMUX Internal Multiplexer address of the parameters used for the Ratio Parameter
Denominator.
@RATIONUMERATORMUX Internal Multiplexer address of the parameters used for the Ratio Parameter
Numerator.
@REDLASERPOWER_END Red laser power at end of acquisition.
@REDLASERPOWER_START Red laser power at start of acquisition.
@REDLASERSHUTTER Red laser shutter status.
@REDTARGETPOWER Red laser target power.
@RESAVEDFILE Displays Runtime Protocol if the current file is exactly as at the end of acquisition, if
any changes are made post acquisition and the LMD file is resaved, the new file
displays New Protocol.
@SAMPLEID1 User defined string.
@SAMPLEID2 User defined string.
@SAMPLEID3 User defined string.
@SAMPLEID4 User defined string.
@SETTINGSFILE Instrument settings file used for acquisition.
@SETTINGSFILEDATETIME The date and time of the instrument settings file used for acquisition.
@STOPREASON Contains the reason why the acquisition was stopped. It can be one of the following
values:
“ERROR”: Instrument error occurred
“PROTOCOL”: Event count or acquisition time limit met.
“MANUAL”: User selected stop.
“MAX EVENTS”: Maximum events for the number of selected parameters reached.
“UNKNOWN”: The stop reason is unknown.
TESTFILE Protocol file name.
TESTNAME Protocol name.
@TUBENO The tube number (location on the carousel) from which the data set was acquired.
@VIOLETLASERPOWER_END Violet laser power at end of acquisition.
@VIOLETLASERPOWER_START Violet laser power at start of acquisition.
Table 4.1
FCS 2.0 Keyword Information
FCS 2.0 Keyword Key value