Beckman Coulter Navios, Инструкция по эксплуатации

Страница: 84 / 586

773232AH
4-12
Specifications
Software Specifications
$PnV Voltage of sensor associated with parameter n.
$PROJ Project name (from Workspace Preferences)
$RUNNUMBER (See $SMNO) System defined run number, that is, a number which is incremented
each time the flow cytometer is used to acquire data.
$SMNO System defined run number, that is, a number which is incremented each time the
flow cytometer is used to acquire data.
$SRC Sample Source (from Workspace preferences)
$SYS BCI
$TOT Total number of events acquired.
@ABSCALFACTOR Defines the calibration factor of the beads used with this sample if Flow-Count or
similar absolute calibration particles are used.
@ACQTIME Acquisition time from start to end of acquisition (excluding pause time).
@ACQUISITIONPROTOCOLOFFSET Defines where in the LMD file the Runtime Protocol is stored, the value displayed is
number of bytes from start of file to the start of the protocol section.
@BARCODE Barcode read from the sample loader or “No Read” if nothing is read.
@BASELINEOFFSET Default is 'OFF' any other means ON, that is, this sample was acquired using baseline
offset.
@BLUELASERPOWER_END Blue laser power at end of acquisition.
@BLUELASERPOWER_START Blue laser power at start of acquisition.
@BLUELASERSHUTTER Blue laser shutter status.
@BLUETARGETPOWER Blue laser target power.
@BUILDNUMBER Software build number.
@CAROUSEL Carousel number read from the sample loader.
@CYTOLINKMULTIPLECLIENT Indicates whether other Cytolink client was connected to CytoLink during acquisition
of the LMD file (“TRUE” or “FALSE”).
@CYTOMETERID The unique ID given to the flow cytometer by the user, for example: the flow
cytometer serial number.
@Discriminator Displays the discriminator detector and level. In the form: “Detector Name, Level”.
The Level value corresponds to the setting value displayed in the Cytometer Control
screen.
@ELAPSEDTIME Total elapsed time from start to end of acquisition (including acquisition and pause
time).
@FILEGUID Unique 128 bit number identifying this file, changed every time the file is saved.
@LOCATION The address of the institute who owns the flow cytometer.
@PANEL Name of the panel file used for acquisition of the sample.
@PnADDRESS Mutliplexor address of parameter n.
@PnC Calculation method for parameter n, 'ARITHMETIC' means use arithmetic method for
calculation. ‘GEOMETRIC’ means use of a geometric method for calculation. This
value may be overridden by analysis engine.
Table 4.1
FCS 2.0 Keyword Information
FCS 2.0 Keyword Key value