Beckman Coulter Navios, Инструкция по эксплуатации

Страница: 277 / 586

773232AH
10-81
Using Navios Software
Tools Menu
10
5
Open . The files are listed in the AutoMATOR Setup dialog box.
6
to accept changes. does not apply any of the changes made.
NOTE
To select all the files, press
(
Ctrl+A
)
.
These icons allow you to insert a pause or a stop into the panel, or let the panel run straight through
from start to finish. Clicking repeatedly on the icon until it displays the desired status modifies the
status in the highlighted file.
In this example, the four files would run and then pause before printing. This allows you to make
any necessary alterations to the plots and regions before outputting results.
NOTE
When replaying multiple batches of listmode files or running a batch of large listmode files, it is
recommended to use the AutoPause or Continuous Pause selections
Status Icon:
Pause The Auto Pause function pauses the run of tests pauses and then
carries on with the rest of the panel automatically after a 15-second
wait. The countdown shows on the AutoMATOR Status Bar. When the
tests are in the Auto Pause setting, you can hold down
(
Shift
)
and click
the Pause button.
(
Shift
)
overrides the Auto Pause, placing the
AutoMATOR into Continuous Pause. To restart, click the Run
button and the test resumes from the point at which it was paused.
Continuous Pause Pauses the tests for modifications and remains on pause until you
decide that processing continue. This function allows the test to stop
without reverting to the beginning of the panel again. To resume the
test, click the Run button.
Continue Plays back the indicated file without pausing.