Arctic Cat 650 Twin2004, Руководство по обслуживанию

Страница: 190 / 210

9-6
AF682D
2. Rotate the adjuster sleeve until 0.5-1.0 mm
(0.02-0.04 in.) is attained.
AL611D
3. Secure the adjustment by tightening the jam nut;
then slide the boot over the jam nut.
0732-412
Drive Selector
The automatic drive selector allows the operator to
operate in either 2-wheel drive (rear wheels) or
4-wheel drive (all wheels). For normal riding on flat,
dry, hard surfaces, 2-wheel drive should be sufficient.
In situations of aggressive trail conditions, 4-wheel
drive would be the desired choice.
To either engage or disengage the front wheels, move
the switch to the 4WD position or to the 2WD posi-
tion.
738-422A
Shift Lever
The ATV with an automatic transmission has a
dual-range transmission with reverse. To shift the
ATV, follow these steps:
1. To engage the high range from neutral, move the
shift lever forward.
2. To engage the low range from high range, move
the shift lever outward and forward.
0736-565
3. To engage reverse gear from neutral, move the
shift lever outward and rearward into the R posi-
tion.
! CAUTION
Do not attempt to either engage or disengage the
front differential while the ATV is moving.