Arctic Cat 650 Twin2004, Руководство по обслуживанию

Страница: 44 / 210

3-15
3
KX266
7. Remove the spacer (A), idler gear assembly (B),
and washers and spacer (C); then remove low and
high range gears (D).
KX267
8. Remove the two needle bearings (A); then using a
press, remove the driven shaft (B).
KX268

NOTE: Check all parts including gears, shifter,
gear dogs, and splines. Replace chipped, dam-
aged, or worn parts.
KX269
9. Check angle (A) for shift fork bending. It must be
90°.
ATV2069
10. Measure the thickness of the shift fork at (A); then
measure the shifter groove width (B). If they are
out of specification, they must be replaced.
KX270
REMOVING OUTPUT
DRIVE/DRIVEN BEVEL GEAR
ASSEMBLY
1. Remove the oil pipe, cap screws (A), and the
output drive bevel gear cover (B).