Arctic Cat 650 Twin2004, Руководство по обслуживанию

Страница: 14 / 210

2-5
2
KX038
2. Unsnap the four clips securing the storage com-
partment/filter housing cover; then remove and set
aside.
KX031
KX032
3. Remove the air filter assembly and separate the
foam element from the frame.
KX033
4. Fill a wash pan larger than the filter with a
non-flammable cleaning solvent; then dip the filter
in the solvent and wash it.

NOTE: Foam Filter Cleaner (p/n 0436-194) and
Foam Filter Oil (p/n 0436-195) are available from
Arctic Cat.
5. Dry the filter.
6. Put the filter in a plastic bag; then pour in air filter
oil and work the filter. Reattach the filter to the
frame.
7. Clean any dirt or debris from inside the air cleaner.
Be sure no dirt enters the carburetor.
8. Place the filter assembly in the air filter housing
making sure it is properly positioned and properly
seated with the filter frame down.
9. Install the air filter housing cover and secure with
the retaining clips; then install the storage com-
partment cover housing.
10. Install the seat making sure the seat is properly
secured.
CHECKING AND CLEANING DRAINS
1. Inspect one-way drains beneath the main housing
for debris and for proper sealing.
KX045A
2. Replace any one-way drain that is cracked or
shows any signs of hardening or deterioration.
! CAUTION
A torn air filter can cause damage to the ATV
engine. Dirt and dust may get inside the engine if
the element is torn. Carefully examine the
element for tears before and after cleaning it.
Replace the element with a new one if it is torn.
! CAUTION
The one-way drain to the right is the clean air
section of the filter housing. Any leak of this
one-way drain will allow dirt into the engine
intake causing severe engine damage.