Arctic Cat 650 Twin2004, Руководство по обслуживанию

Страница: 68 / 210

3-39
3
KX322
7. Place the bearing housing into the holding fixture;
then apply blue Loctite #242 on the threads of the
bearing retainer (A). Install with the dished side
(B) directed away from the bearing and tighten to
12 kg-m (87 ft-lb).
KX323
8. Press the drive bevel gear in until it bottoms; then
apply blue Loctite #242 to the threads (A) of the
bevel gear retainer nut and with the raised side (B)
directed away from the bearing, tighten to 16 kg-m
(116 ft-lb).
KX324
9. Press the outer ball bearing in until it is bottomed
out.
KX325A
10. Using the bearing driver (A), drive the bearing
into the housing until it bottoms out.
KX326
11. Place the bearing housing (A) into the holding
fixture (B); then apply blue Loctite #242 to the
threads of the bearing retainer (C). Install the
bearing retainer and tighten to 14 kg-m (101 ft-lb).
KX327
12. Secure the output shaft holding fixture (B) and
spacer (C) in a vise; then hold the housing
assembly (A) and install the output shaft (D) in the
housing.
13. Apply blue Loctite #242 to the threads of the
output shaft retainer nut (E) and with the
protruding side (F) directed away from the
bearing, tighten to 16 kg-m (116 ft-lb).