Xerox ApeosPort-II 3000, User Manual

Page: 101 / 619

Job Assembly
99
Copy
3
„ Booklet Creation
For information on the feature, refer to "Booklet Creation (Creating a Booklet)" (P.81).
„
Covers
For information on the feature, refer to "Covers (Attaching Covers to Copies)" (P.84).
„ Annotation
For information on the feature, refer to "Annotation (Adding a Stamp/a Date/Page Numbers to Copies)"
(P.88).
„ Watermark
For information about the feature, refer to "Watermark (Printing Control Numbers on the Background of
Copies)" (P.92).
[Copy Job] screen
The following describes the screen that appears while the Build Job is being executed.
„ Chapter Start...
Displays the [Build Job - Chapter Start/Separators] screen.
Refer to "[Build Job - Chapter Start/Separators] Screen" (P.100).
„ Change Settings...
Displays the [Copy] screen allowing you to change the settings. After changing the
settings as necessary, press the <Start> button on the control panel to start scanning
the document.
„ Last Original
Ends scanning the document and starts copying.
„ Next Original
Select this button when you have more documents to scan. This item is selected when
using the Build Job feature.
„ Cancel
Clears the data scanned by the Build Job feature and cancels the job.
Note • The same operation is performed if you press the <C (Clear)> or <Clear All> button on the
control panel.
„ Start
After loading the next document, select [Start] to scan the next document.
Note • The same operation is performed if you press the <Start> button on the control panel.