Xerox ApeosPort-II 3000, User Manual

Page: 62 / 619

3 Copy
60
Copy
3
2
Select the job to cancel, and then
select [Stop].
Changing the Number of Copies
During scanning or copying the document, you can change the number of copy sets.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
2
Select [Change Quantity...].
3
Set the number of copy sets with the numeric keypad. The new quantity must include
the number of copies that have already been printed. You cannot enter a number less
than the number of copies that have already been printed.
4
Press the <Start> button.
Interrupting the Copy Job
You can temporarily stop the copy job to have the machine process another job.
1
Press the <Interrupt> button.
Note • The interrupt indicator lights
up to indicate that the
machine is in the interrupt
mode.
2
Load a document and set features
if necessary.
1 2 3
4 5 6
7 8 9
0 #
C
<Stop> button
1 2 3
4 5 6
7 8 9
0 #
C
<Interrupt>
button