Xerox ApeosPort-II 3000 User Manual Download Page 551

Page: 551 / 619

ESC/P-K Emulation

549

Appe

nd
ix

Fonts

This section explains the fonts used for emulation.

Available fonts

Available fonts are the followings:

Roman

Sans serif

User-defined Characters

On this machine, you can use user-defined characters. User-defined characters can be

stored only in memory. Therefore, they are erased when the machine is switched off.

When the HDD Extension Kit (optional) is added to the machine, user-defined

characters can be stored on the hard disk, and are not erased even when the machine

is switched off. The volume of user-defined characters that can be stored on the hard

disk drive is the same as the volume when stored in memory.
The total capacity of memory for storing user-defined characters and other user-

defined data can be set on the control panel. This value is retained after the machine

is switched off.
User-defined characters are registered as bitmap fonts, and cannot be shared among

different printer languages.

Font Caching

To ensure high-speed printing, outline fonts of up to a certain size are cached. Outline

fonts are converted into bitmap data temporarily and then printed. To minimize this

processing time, the processed bitmap data is saved in the memory. This process is

called font caching.
The saved bit map data is deleted upon power-off or system reset.

Output Feature

This section describes the machine's output feature.

Outputting a Pending Print Job

The jobs received by the printer can be prioritized over other jobs.

For information on how to give priority to the jobs received by the printer, refer to "Printing Pending
Jobs" (P.363).

Summary of Contents for ApeosPort-II 3000











































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-II 3000

Reviews:

Related manuals for ApeosPort-II 3000

Brands by name

Popular brands

Xerox ApeosPort-II 3000, User Manual

Search results

Summary of Contents for ApeosPort-II 3000

Reviews:

Related manuals for ApeosPort-II 3000

Brands by name

Popular brands