Xerox ApeosPort-II 3000 User Manual Download Page 410

Page: 410 / 619

14 Maintenance

408

na
nc
e

Make sure that the machine has
stopped, and then open the front
cover.

Hold the bottom of the toner
cartridge and slide it out of the
machine.

Hold the toner cartridge by its
handle and pull it out slowly.

Important •

Pull out the toner cartridge
gently. Otherwise, toner may
fly out of the cartridge.

•

Return used toner cartridges
to our Customer Support
Center.

Remove the new toner cartridge
out of the box and shake it from side to side before removing it out of the bag.

Hold the toner cartridge by its
handle and slide it into the machine
until it comes to a stop.

Note

•

Be sure to insert the toner
cartridge into the machine
until it clicks into place.

Close the front cover.

Note

•

If you do not completely close the front cover, the machine will display a message and not
resume operation.

Summary of Contents for ApeosPort-II 3000











































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-II 3000

Reviews:

Related manuals for ApeosPort-II 3000

Brands by name

Popular brands

Xerox ApeosPort-II 3000, User Manual

Search results

Summary of Contents for ApeosPort-II 3000

Reviews:

Related manuals for ApeosPort-II 3000

Brands by name

Popular brands