manualshive.com logo in svg

Wintriss SmartPAC 2, User Manual, Page: 520 / 604

Share
Download
Wintriss SmartPAC 2 User Manual Download Page 520

1128600

SmartPAC 2 with WPC 2000 Integration User Manual

I-16

Reporting Downtime and Scrap to LETS

replace that entry.  The SmartPAC 2 will display a message stating that the downtime 
reason has been sent to the host computer.

4.

If Auto Backfill has been disabled, the window shown in Figure I-10 displays.

Press the 

F2

 (Change Prev. Reason) function key to “backfill” the selected downtime 

reason, in other words, to assign it to the period from the time that the press was stopped 
up to entry of the next downtime reason or the BACK ON LINE selection.  If a SmartPAC 
2 fault has already been assigned to this period of press inactivity, that fault will be 
documented as having consumed 1 second and the remainder of the period filled with the 
downtime reason you selected.  If the period has been documented as Idle Time, your 
downtime reason will replace that entry.

or

Press 

F3

 (Keep Prev. Reason) to leave documentation of the period up to the present 

unchanged and “forward fill” the selected downtime reason, in other words, assign it to 
the period from the present up to entry of the next downtime reason or the BACK ON 
LINE selection.

The SmartPAC 2 will display a message stating that the downtime reason has been sent to 
the host computer.

 

Figure I-10. Dialog Menu with F2/F3 Option Window Displayed

F1
F2
F3
F4
F5
F6
F7
F8

Summary of Contents for SmartPAC 2





























































































































































































































































































































































































































































































































































































































Reviews:

No comments