Wintriss SmartPAC 2, User Manual

Page: 273 / 604

SmartPAC 2 with WPC 2000 Integration User Manual 1128600
Program Mode 5-19
Green Quick Check Sensors
A sensor input set to “green quick check” must turn on, at least momentarily, within the
Ready signal and may not turn on
outside the Ready signal (see Figure 5-18). In other words,
the sensor must turn on and turn off within the Ready signal.
Green Constant Sensors
When you set a sensor input to “green constant,” the sensor must turn on before the Ready
signal begins and turn off after the Ready signal ends, remaining actuated continuously during
the entire Ready signal (see Figure 5-19).
Figure 5-18. Ready Signal Programming for a “Green Quick Check” Sensor
Figure 5-19. Ready Signal Programming for a “Green Constant” Sensor
KEY
= Ready
Signal
Green
Quick Check
Sensor
not allowed
(press stops)
Sensor never goes
ON.
Stop signal sent at
end of ready signal.
TDC
BDC
OK
Sensor goes ON
only inside ready
signal.
TDC
BDC
Sensor is ON outside ready signal.
Stop signal sent when sensor is ON outside ready
signal.
not allowed
(press stops)
TDC
BDC
TDC
BDC
TDC
BDC
= Sensor
ON
Sensor never goes
ON.
Stop Signal sent at
end of ready signal.
TDC
BDC
not allowed
(press stops)
Sensor goes OFF
before ready signal
ends.
Stop signal sent
immediately.
not allowed
(press stops)
TDC
BDC
OK
Sensor staysON
during entire ready
signal and goes OFF
at least momentarily
outside the ready
signal.
TDC
BDC
KEY
= Sensor
ON
Green
Constant
Sensor
not allowed
(press stops)
Sensor never goes
OFF outside ready
signal.
Stop signal sent at
beginning of ready
signal.
TDC
BDC
= Ready
Signal