Wintriss SmartPAC 2, User Manual

Page: 300 / 604

1128600 SmartPAC 2 with WPC 2000 Integration User Manual
5-46 Program Mode
Setting DSV ON Channel Timing
The PROGRAM DSV ON item on the Cam Channel Program Type Menu enables you to set
the amount of time (in seconds) after the press stops that a DSV On cam channel remains on.
A DSV On cam channel turns on when the Dual Safety Valve is energized and the press starts
and turns off when the DSV is de-energized and the press stops. You set the DSV delay time
on the Cam Channel DSV On Program Screen, which is shown in Figure 5-52.
DSV On cam channel programming is useful for controlling conveyors and other accessories
that must operate for a short time after the press stops. Instead of setting a specific time for
the Off delay, you can select the OUTPUT FOLLOWS RESOLVER MOTION setting, which
keeps the cam channel on until resolver rotation falls to 6 SPM.
To set the DSV delay time, do the following:
1.
Select PROGRAM DSV ON on the Cam Channel Program Type Menu. The Cam
Channel DSV On Program screen displays.
2.
Increment or decrement the OFF DELAY TIME value (maximum is 254 seconds), using
the Up (

) or Down (

) cursor key
or
Select the OUTPUT FOLLOWS RESOLVER MOTION setting by pressing the Down
(

) cursor key with “0” (zero) displayed in the OFF DELAY TIME field or the Up (

)
cursor key with “254” displayed in the OFF DELAY TIME field.
3.
Press RESET when you are done to return to the Cam Channel Program Type Menu.
Deleting Channel Settings
The DELETE CHANNEL SETTINGS item on the Cam Channel Program Type Menu
enables you to delete programmed settings for a selected cam channel. When you delete cam
channel settings, all programmed angles and times return to 0 (zero).
Figure 5-52. Cam Channel DSV On Program Screen