Wintriss SmartPAC 2, User Manual

Page: 165 / 604

SmartPAC 2 with WPC 2000 Integration User Manual 1128600
Keyboard, Displays, Etc. 3-5
The number keys are also used to execute several functions. Pressing the 8 and 0 keys at the
same time saves a screen capture of the current display (see page 3-23). Pressing 2 and 0
simultaneously on a selected Run mode screen programs the next function key you press as a
Hot key for that screen (see page 6-3). Pressing the decimal point (.) key on the Main Run
Menu opens a window in the upper right corner of the screen displaying the crankshaft angle
in large characters (see page 6-6). This window carries over to other Run mode screens on
which a prominent crankshaft angle display is useful such as angle adjustment screens for
cams and die protection sensors. These keys and their functions are summarized in Table 3-1.
CLEAR Key
The CLEAR key, shown in Figure 3-8, is used to delete digits or characters in a SmartPAC 2
entry window (see Figure 3-6 and Figure 3-7). You also use the CLEAR key as directed in
other procedures, such as deleting a tool.
Figure 3-7. Alphanumeric Entry Window
Table 3-1. Number Key Functions
Key/Key Combination Function
8 and 0 Capture screen
2 and 0 Program Hot key
Decimal point (.) Display crankshaft angle on Main Run
Menu and selected Run mode
screens
Figure 3-8. Clear Key
CLEAR
CLEAR key
ENTER
RESET
PROG RUN
POWER
BRAKE
WARNING
HELP
1 2 3
4 5 6
9 8 7
. 0
CLEAR
SmartPAC 2
F1
F2
F3
F4
F5
F6
F7
F8 CAMBIE
AL ESPANOL
OFF
INCH
SINGLE
STROKE
CONT