SmartPAC 2 with WPC 2000 Integration User Manual
1128600
Run Mode
6-41
2.
Select the desired operating mode by pressing the appropriate function key:
•
Press
F4
to enable Micro-inch
•
Press
F5
to select One-hand mode
•
Press
F6
to select Two-hand mode
•
Press
F7
to select Foot mode
•
Press
F8
to select Automatic mode
3.
Turn the Stroke Select switch the desired setting (i.e., Inch, Single-stroke, or Continuous).
Operating the Press in Inch Mode
To operate the press in Inch mode, do the following:
1.
Make sure the Program/Run key switch is set to RUN.
2.
Turn the Stroke Select key switch of OFF.
3.
Select one of the following options on the Mode Select Menu (see page 6-40):
•
If a light curtain is installed on the press, select “TWO HAND” or “ONE HAND.” The
light curtain will be muted on the upstroke if WPC 2000 has the muting option.
•
If no light curtain is installed, select “TWO HAND.” If you set the switch to
“ONE HAND,” WPC 2000 defaults to Two-hand mode.
4.
Turn the Stroke Select key switch to INCH.
There are four different ways to operate the press in Inch mode:
•
Top-stop in Inch
•
Top-stop Bypass
•
Micro-inch
•
Dead Motor Inch
IMPROPER SAFEGUARDING
Ensure that the machine guarding system is installed and maintained according to OSHA
regulation 1910.217, ANSI standards B11.1 and B11.19, and any other regulations or standards
that apply. Ensure that guarding is properly installed to prevent access to the machine over, under
or around any guarding device.
Failure to comply with these instructions will result in death or serious injury.
INCH MODE NOT SUITABLE FOR PRODUCTION
DO NOT use INCH mode as a production mode, per ANSI B11.1-2009.
Failure to comply with these instructions will result in death or serious injury.
DANGER
!
DANGER
!
Summary of Contents for SmartPAC 2
