1128600
SmartPAC 2 with WPC 2000 Integration User Manual
2-90
Installation
WPC 2000 Power Supply Test
To run the WPC 2000 power supply test, do the following, referring to Figure 2-41 for LED
locations on the WPC 2000 Main Processor board:
1.
Set the Stroke Select key switch to OFF.
2.
Open the front cover of the control enclosure or the door of your console.
3.
Turn on power to WPC 2000.
4.
On the WPC 2000 Main Processor board, check to see whether the +24 VDC, +5 Logic A,
and +5 Logic B LED indicators are illuminated.
•
If all three LEDs are lit, go to the next applicable test.
•
If all three LEDs are unlit, check to make sure that line voltage is being applied to the
system (see step 3), and correct any problems. If the LEDs are still unlit, call Wintriss
Tech. Support.
•
If one or both of the +5 Logic LEDs are unlit, call Wintriss Tech. Support.
Checking Safeguarding Devices
ELECTRIC SHOCK HAZARD WHEN WORKING INSIDE ENCLOSURE WITH POWER ON
• DO NOT touch electrical connections or circuit boards.
• Use test equipment only on the terminals specified in the instructions.
• Ensure that this test is performed by qualified personnel.
Failure to comply with these instructions could result in death or serious injury.
DO NOT USE NON-SAFETY INTERLOCK SWITCHES IN SAFETY APPLICATIONS
• Ensure that all interlock switches used on safeguards are designed and rated for safety
applications. Check with the manufacturer to verify the rating of each interlock switch.
• Ensure that safety interlock switches are connected to control-reliable inputs if they are used for
safeguarding applications.
Failure to comply with these instructions will result in death or serious injury.
PREVENT INJURY DURING TESTING
• Keep all personnel away from the press during testing.
• Be sure there is no die or other tooling in the press during testing.
• Use extreme caution when testing moveable guards. Keep hands and other body parts outside
the guarded area.
Failure to comply with these instructions will result in death or serious injury.
WARNING
!
DANGER
!
DANGER
!
Summary of Contents for SmartPAC 2
