Wintriss SmartPAC 2, User Manual

Page: 544 / 604

1128600 SmartPAC 2 with WPC 2000 Integration User Manual
GL-4 Glossary
lockout A WPC 2000 function that prevents the press from being
restarted after clearing of
fault messages
that indicate serious
errors. The lockout condition is indicated by the lockout
message, which appears on the SmartPAC 2 display. Lockout
provides an added safety feature to the WPC 2000.
lockout message A message (i.e., “PRESS CONTROL IS IN LOCKOUT
MODE”) that appears on the SmartPAC 2 display indicating that
a serious error condition has occurred.
manual enable A die protection mode in which sensors are manually enabled or
disabled by the operator.
messaging A SmartPAC 2 feature that allows e-mails to be sent from
SmartPAC 2 to networked computers, pagers, text-enabled cell
phones and other devices. This feature is set up in SmartView.
Micro-inch A WPC 2000 feature that allows the operator to set the amount of
time in milliseconds that the Dual Safety Valve is open and,
therefore, the distance the ram will travel when the Run/Inch
switches on the Operator Station are pushed in Inch mode.
Micro-inch is designed for high-speed and/or short-stroke
presses.
NEMA 12 A rating that certifies that an electrical device is protected against
dust, water, and oil.
ninety degree (90)
°
stop-
time test
A test required to set the proper
safety distance
for personnel-
guarding devices, including light curtains, two-hand controls, and
type-B movable barriers. This test checks the stopping time of
the press at its most critical stopping point, normally the midpoint
of the downstroke (i.e., 90
°
), while the press is running in
Continuous mode (or Single-stroke if the press does not have a
selector setting for Continuous). Stopping time is a value
required in the ANSI formula for calculating the
safety distance
.
object sensitivity A value required in deriving the
depth penetration factor
for a
light curtain. Object sensitivity specifies the smallest diameter
object that a light curtain can detect anywhere in its field.
on-off setting Stroke angle settings at which the cam channel is to turn “on”
(activate) and turn “off” (deactivate).
OSHA Stands for Occupational Safety and Health Administration, a
government agency that has established regulations for
mechanical power presses including presence-sensing devices for
point-of-operation guarding.