Viavi Xgig User Manual Download Page 432 | Manualshive

Page: 432 / 468

background image

Chapter 20, Xgig Trace View Hints and Tips

Toolbar

418

Xgig Analyzer User’s Guide

Toolbar

The toolbar provides shortcuts to commonly used functions.

Figure 188: TraceView Toolbar

Open Domain Button
This button opens a domain. A dialog
box displays to select the domain
from the list of domains. If no
domains exist, the message “No
Domain(s) with a valid data
capture(s) found” is displayed.

Open Last Domain Button
This button displays the last domain
used with TraceView on this
computer. If there is no last domain
established, this button is grayed out.
If no domains exist, an error message
is returned.

Traffic Summary Button
Press this button to toggle the
display of the Traffic Summary
pane. Enabled only for
6G and 12G SAS/SATA traces
captured with Xgig Analyzer
software version 4.3 or later and
Fibre Channel 8G and 16G
traces captured with Analyzer
version 4.5 or later.

Save Button
This button saves the contents of the
trace to a new trace file. If the extent
of the original trace has been
narrowed, the subset of trace data is
saved to a file.

Export Trace to File Button
This button exports the
contents of the trace to a
text file.

Show Details Pane Button
Press this button to toggle between
show and hide of the Details Pane.
The Details Pane displays at the
bottom of the screen and shows you
a detailed interpretation of all the raw
data of an event.

Open Trace Button
This button opens a trace file (.trc) or
a trace group file (.tgp). Trace
contents display in the Xgig
TraceView spreadsheet display. If a
trace or domain is already opened,
all views of this trace are closed

Spreadsheet Options Button
The spreadsheet options
button allows you to
customize the spreadsheet
display of trace data. You can
set up ports with different
colors, or change the font and
gridlines of the spreadsheet.

Bookmarked Event Pull Down
The pull down menu in the Xgig
TraceView toolbar contains all
bookmarks. Selecting a bookmark
takes you to that event in the trace.
When you pull-down the box, it
expands horizontally to include all
bookmark information.

Delta Calculator Button
The Delta Calculator button
calculates the delta time
between any two events in a
trace.

Exchange View Button
This button toggles
Exchanges View on and off.

«
...
430
431
432
433
434
...
»

Summary of Contents for Xgig





















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Xgig

Brand: Oakton Pages: 4

Brand: Keithley Pages: 148

DigitalFlow XMT868i

Brand: Panametrics Pages: 74

Brand: RADWAG Pages: 12

Brand: YOSensi Pages: 26

Brand: YOSensi Pages: 26

Brand: FISCHER Pages: 20

Brand: THORLABS Pages: 21

Brand: WIKA Pages: 88

XL4 SECOND STAGE

Brand: Apeks Pages: 21

Brand: Fora Pages: 64

Brand: Bitzer Pages: 8

Brand: Vega Pages: 44

Brand: Omega Pages: 13

Multifunction Compensator

Brand: Halcyon Pages: 20

Brand: Trotec Pages: 3

Photo Set Strato S-20

Brand: Fisso Pages: 2

Brand: Hanna Instruments Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands