Viavi Xgig User Manual Download Page 266

Page: 266 / 468

Chapter 13, Configuring Xgig TraceView

Filter And Hide

252

Xgig Analyzer User’s Guide

The

Quick Find/Filter/Hide

dialog field combo box contains only the fields for the current event.

For the

Summary

Source

, and

Destination

columns, the combo only gives a choice of the subset

of visible fields in the column.

The

Quick Find/Filter/Hide

dialog also lists the last ten finds, filters, and hides that you have

performed and lists them in the drop-down menu.

If you double-click in the

Summary

column (or any other compound column), the

Quick Find/

Filter/Hide

dialog comes up with the first visible field in the column if the column is left-aligned,

or the last visible field if the column is right-aligned.

To filter data:

Right-click the column value in an event row that you wish to select.

Select

Quick Find/Filter/Hide…

. The

Quick Find/Filter/Hide

dialog box appears.

The dialog box displays the information field you have selected, a logical operator, and the
value of the field in the display.

Select the

Filter

radio button.

Click the

Filter

button. This action removes all events except those that meet the condition. If

you have set multiple conditions, events are selected if they meet any one of the multiple
conditions.

You can use the menus or control keys,

Edit > Quick Find/Filter/Hide (Ctrl+F3)

, to bring up the

dialog box. Once Quick Filters have been established, you can clear the list by selecting the

Clear

button from the

Quick Find/Filter/Hide

dialog box.

Quick Filter Options

When you select a field, the option in the pull-down box of

Quick Find/Filter/Hide

dialog is set to

the value of

Field

. Quick Filter options are identical to the options for Quick Find. See

“Quick

Find Options” on page 237

for a more detailed description of the options and examples. The

options are:

•

Field

•

Simplified search

(available under certain conditions) See

“Quick Find Options” on page 237

for details.

•

Factory search

(available under certain conditions) See

“Quick Find Options” on page 237

for details.

•

Template

•

Fixed hex

•

Sliding hex

•

ASCII string

•

Unicode string

•

EBCDIC string

Summary of Contents for Xgig





















































































































































































































































































































































































































































































Search results

Summary of Contents for Xgig

Reviews:

Related manuals for Xgig

Brands by name

Popular brands

Viavi Xgig, User Manual

Search results

Summary of Contents for Xgig

Reviews:

Related manuals for Xgig

Brands by name

Popular brands