manualshive.com logo in svg

Viavi Xgig, User Manual

Download the free user manual for Viavi Xgig, the ultimate network analysis tool. This comprehensive manual provides step-by-step instructions on how to maximize the capabilities of your Xgig device. Find the user manual available for instant download at manualshive.com, ensuring you have all the essential information at your fingertips.

Share
Download
background image

Chapter 10, Xgig Performance Monitor Configuration

Hardware Options

190

Xgig Analyzer User’s Guide

  

For Fibre Channel, the link speed can be set to the highest speed supported by the blade containing 
the ports, or a supported lower speed. Available link speeds for Xgig Fibre Channel are 1.0625 
Gbps, 2.1250 Gbps, 4.2500 Gbps, or 8.5000 Gbps. For example, the Xgig 2 Gigabit 
Multi-Function Blade ports can be set to 

1.0625 Gbps

 or 

2.1250 Gbps

; however, higher rates are 

not supported. The link speed for Xgig5000 16G FC is 14.0250 Gbps and cannot be changed.

The link speed is fixed at 

1.2500 Gbps

 and cannot be changed for Gigabit Ethernet analyzer ports.

For 3G SAS/SATA blades, the link speed can be set to 

1.5000 Gbps

, 

3.0000 Gbps

, or 

Auto

. For 

example, select the 

3.0000 Gbps

 option from the pull-down menu to set the link speed to 3.0000 

Gbps. 

For 6G SAS/SATA blades and systems, the link speed can be set to the highest rate supported by 
the blade containing the ports, a supported lower rate, or one of the 

Auto

 selections. The Xgig 6G 

SAS/SATA Wide-Port/4x Blade, the 6G SAS/SATA Narrow blade, and the LX and LXP fixed-port 
systems support 1.5000 Gbps, 3.0000 Gbps, and 6.0000 Gbps. For example, select the 

3.0000 

Gbps SAS

 option from the 

Link Speed

 pull-down menu to set the link speed to 3.0000 Gbps. 

These blades and systems also have an auto-detect option, which will automatically detect the link 
speed between 1.5000 Gbps, 3.0000 Gbps, and 6.0000 Gbps.

The Auto options available for 6G SAS/SATA blades and systems are 

SAS 6/3/1.5G & SATA 3/

1.5G 

and 

SATA 6/3G.

 For the 

Auto

 options, no actual negotiation or handshake takes place 

between the analyzer and any external device – the blade ports merely detect the data speed from 
the speed negotiation sequence happening on the link. The 

Auto

 options can automatically 

determine the link speed only if the Xgig ports see the link initialization activities that take place 
(for example, OOB and speed negotiation events). If link initialization sequence does not happen 
while an 

Auto

 option is set, the blade will retain its existing speed. For example, select the 

1.5000 

Gbps 

option for the Link Speed in the TraceControl Configuration window to set the link speed to 

1.5000 Gbps. Then select the 

Auto (SAS 6/3/1.5G & SATA 3/1.5G) 

option for the Link Speed. If 

no link initialization happens, the speed of the blade will still be 1.5000 Gbps.

For 12G SAS blades, the link speed can be set to the highest rate supported by the blade containing 
the ports, a supported lower rate, or one of the 

Auto

 selections. The Xgig5000 12G SAS Wide Port 

blade and the Xgig1000 12G SAS blade support a link speed 3.0000, 6.0000, or 12.0000 Gbps. 
These blades and systems also have an auto-detect option, which will automatically detect the link 
speed between 3.0000 Gbps, 6.0000 Gbps, and 12.0000 Gbps.

The Auto options available for 12G SAS blades are 

Auto (SAS 12/6G)

, 

Auto (SAS 12/6/3G)

, and

 

Auto (SAS 6/3G)

.

 

For the 

Auto

 options, no actual negotiation or handshake takes place between 

the analyzer and any external device – the blade ports merely detect the data speed from the speed 
negotiation sequence happening on the link. The 

Auto

 options can automatically determine the 

link speed only if the Xgig ports see the link initialization activities that take place (for example, 
OOB and speed negotiation events). If link initialization sequence does not happen while an 

Auto

 

option is set, the blade will retain its existing speed. For example, select the 

3.0000 Gbps

 option 

for the Link Speed in the TraceControl Configuration window to set the link speed to 3.0000 
Gbps. Then, select the 

Auto (SAS 6/3G) 

option for the Link Speed. If no link initialization 

happens, the speed of the blade will still be 3.0000 Gbps.

For PCIe, the link speed can be set to the highest rate supported by the blade containing the ports, 
or a supported lower rate. Available rates for Xgig PCIe, in GT/s, are 2.5 (Gen1), 5.0 (Gen2), and 
8.0 (Gen3). You can also select 

Auto

, and the Xgig will select the correct speed based on the 

device under test, and if it cannot, it will default to 8.0 (Gen3).

Summary of Contents for Xgig





















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Xgig

TA Q Series Getting Started Manual preview
Q Series
Brand: TA Pages: 58
Yamaha P-100 Owner'S Manual preview
P-100
Brand: Yamaha Pages: 69
Calsense ET2000 Setup preview
ET2000
Brand: Calsense Pages: 4
Hammond Organ A-100 Series Theory Of Operation preview
A-100 Series
Brand: Hammond Organ Pages: 25
Hammond Organ L-100 Series Service Manual preview
L-100 Series
Brand: Hammond Organ Pages: 87
LATNEX RF Explorer User Manual preview
RF Explorer
Brand: LATNEX Pages: 55
Laser Technology TruPulse 200X Quick Reference Manual preview
TruPulse 200X
Brand: Laser Technology Pages: 11
Laser Technology TruPulse 200X User Manual preview
TruPulse 200X
Brand: Laser Technology Pages: 62
R&S FS300 Operating Manual preview
FS300
Brand: R&S Pages: 248
S.E. International USB Inspector Operation Manual preview
USB Inspector
Brand: S.E. International Pages: 30
SZBJ BM5263 Operator'S Manual preview
BM5263
Brand: SZBJ Pages: 2
Alfa Laval TE67D 1 Series Instruction Manual preview
TE67D 1 Series
Brand: Alfa Laval Pages: 18
Alpes Lasers ECLK User Manual preview
ECLK
Brand: Alpes Lasers Pages: 41
Thermo Scientific TruDefender FT User Manual preview
TruDefender FT
Brand: Thermo Scientific Pages: 56
Velleman NETBPEM User Manual preview
NETBPEM
Brand: Velleman Pages: 15
Kawai CN34 Software Update preview
CN34
Brand: Kawai Pages: 2
KEYBOARDPARTNER HX3 Drawbar Expander Version 5 Manual preview
HX3 Drawbar Expander Version 5
Brand: KEYBOARDPARTNER Pages: 11
Carman NGA6000 Notes For Users preview
NGA6000
Brand: Carman Pages: 64

Brands by name

Popular brands

Load more brands