Viavi Xgig, User Manual

Page: 142 / 468

Chapter 4, Xgig TraceControl Capture Configuration Capture and Trigger Setup
128 Xgig Analyzer User’s Guide
The Go To dialog appears.
3
Select the state you want to transition to from the drop-down menu.
4 Click OK.
A transition line shows the transition from one state to the other. Notice that the transition line
is the same color as the state you are transitioning to. If the state is above the current state, then
the transition line is on the left. Otherwise, the transition line is on the right.
Once you define a transition to another state for the transition labeled “if”, a new transition
bubble named, “
else if
” appears.
A new “
else if
” transition bubble appears each time you define a transition to another state
until you reach the maximum per state of one trigger and three transitions to other states.
To create the trigger, follow these steps.
1 Click the transition bubble of the state you want to transition from.
2
In the Actions pane, click .