manualshive.com logo in svg

Simrad Maris ECDIS900, Operator'S Manual

The Simrad Maris ECDIS900 is a cutting-edge navigation system used by maritime professionals. Ensure seamless installation and optimum performance with our comprehensive Installation Manual, available for free download at manualshive.com. Gain full access to the manual and unlock the potential of this exceptional product for your navigation needs.

Share
Download
background image

RCDS mode

When an ARCS chart is selected (right click on the chart and in the pop-up menu click

 Other

charts/ARCS

), the proper chart will appear on the display and the RCDS mode is indicated in

the windows title bar at the top left hand corner of the screen.

In addition to the name and ID of the charts, ECDIS900 displays the datum of the chart and
the datum shift between this datum and WGS84.

Ú

Note: 

When no datum information is available for the chart, the system displays the

message 'Undetermined' in the windows title.

ENC data available indicator

When a route is checked for danger, an indication is given when the route crosses an area
covered by ENC data. When a route is being monitored (see ) an alarm is given when the ship
enters an area covered by ENC data.

Chart handling

The ECDIS900 software is copy protected with a dongle and Personal Identification Number
(PIN).

Each ARCS chart permit has a unique 40-digit code linked to a UKHO User Permit Number
issued against a customer PIN.

The PIN number must be entered when asked on the first occasion ARCS charts are installed.

The ARCS User License Number (6 digits) is required when ordering charts.

Entering PIN code

If the PIN is invalid, a warning appears and the mariner has to re-type the PIN code.

If, after the three attempts, the user has still failed to enter the correct PIN, the system does
not allow the user to enter the PIN again for a certain time.

If the problem persists, contact NAVICO support.

Chart handling

Management of the ARCS chart database is carried out within the Chart handling dialog.
Select the ARCS tab and install permits or charts or delete charts or update the database or
access the collection status from this dialog.

Charts

 | ECDIS900 Operator Manual

85

Summary of Contents for Maris ECDIS900















































































































































































































Reviews:

No comments

Related manuals for Maris ECDIS900

Xtrons PD series User Manual preview
PD series
Brand: Xtrons Pages: 30
Lincoln SKF TLMR 101 Original Operating Instructions preview
SKF TLMR 101
Brand: Lincoln Pages: 40
Prestigio GeoVision 5850 Manual preview
GeoVision 5850
Brand: Prestigio Pages: 22
Nextar M3-02 Quick Start Manual preview
M3-02
Brand: Nextar Pages: 1
Hyundai C2ECH05 User Manual preview
C2ECH05
Brand: Hyundai Pages: 82
Magellan RoadMate 5465T-LMB User Manual preview
RoadMate 5465T-LMB
Brand: Magellan Pages: 41
Bosch PSARCCA100 Handbook preview
PSARCCA100
Brand: Bosch Pages: 54
Bosch Center CM-C 19 Operating Instructions Manual preview
Center CM-C 19
Brand: Bosch Pages: 80
Bosch SLDA Operating Instructions Manual preview
SLDA
Brand: Bosch Pages: 142
Bosch AIVIH61L1 Manual preview
AIVIH61L1
Brand: Bosch Pages: 200
Sune Technology Q-Roi Instruction Manual preview
Q-Roi
Brand: Sune Technology Pages: 25
Seat PQ25 Owner'S Manual preview
PQ25
Brand: Seat Pages: 17
Intellinav 3 Quick Start Manual preview
3
Brand: Intellinav Pages: 24
SNOWJOE Aqua Joe AJ-6PSTB Manual preview
Aqua Joe AJ-6PSTB
Brand: SNOWJOE Pages: 16
VDO MM 2100 Owner'S Manual preview
MM 2100
Brand: VDO Pages: 6
Graco FIRE–BALL 300 Air Motor Muffler Kit Instructions-Parts List preview
FIRE–BALL 300 Air Motor Muffler Kit
Brand: Graco Pages: 4
Graco 258262 Operation, Service, & Parts preview
258262
Brand: Graco Pages: 16
ACR Electronics GlobalWatch 2 AIS Installation Manual preview
GlobalWatch 2 AIS
Brand: ACR Electronics Pages: 43

Brands by name

Popular brands

Load more brands