Simrad Maris ECDIS900 Operator'S Manual Download

Page: 104 / 206

Set a new turning radius

Click on the Turning Radius for the chosen leg and enter the new value in the pop-up dialog
box

The Turning Radius value may also be entered in the Waypoint Properties dialog.

Note:

When the Turning radius is changed, the ROT is also changed according to the

selected speed and vice versa.

Note:

To change the turning radius value for all legs, click in the title Radius.

Set XTD

Use the same procedure as for

Set new turning radius

By default, the XTD value is entered in the Option dialog panel Route.

Note:

Click in the title XTD to modify XTD for all legs.

Set SOG

Use the same procedure as for Set new turning radius.

By default the SOG value is entered in the Route Properties dialog box.

Note:

Click the title SOG to modify SOG for all legs.

Set ETA

Click on the ETA value of the leg and enter a new ETA. Then the leg SOG will be re-calculated.

Note:

Click on the title ETA to enter a new ETA for the last waypoint. In this case the SOG

will be recalculated and constant for all legs.

Print

Click the

Print route plan

button

The route plan is transferred to the text file similar below:

104

Routes

| ECDIS900 Operator Manual

Summary of Contents for Maris ECDIS900















































































































































































































Search results

Summary of Contents for Maris ECDIS900

Reviews:

Related manuals for Maris ECDIS900

Brands by name

Popular brands

Simrad Maris ECDIS900, Operator'S Manual

Search results

Summary of Contents for Maris ECDIS900

Reviews:

Related manuals for Maris ECDIS900

Brands by name

Popular brands