manualshive.com logo in svg

Simrad Maris ECDIS900, Operator'S Manual

The Simrad Maris ECDIS900 is a cutting-edge navigation system used by maritime professionals. Ensure seamless installation and optimum performance with our comprehensive Installation Manual, available for free download at manualshive.com. Gain full access to the manual and unlock the potential of this exceptional product for your navigation needs.

Share
Download
background image

Move the slider to move the ship along its scheduled course by the corresponding time
margin.

Use own vector predictor

Linear predictor calculates future positions according to current course and speed. The
screen shows the predicted positions.

Press the 

Settings

 button to adjust the values if needed.

Target list

To display the list of the tracked targets click on the 

Target list

 button.

•

Double click on the target name will center the chart on the target.

•

Double click on the CPA title sorts out the targets by CPA values.

•

Double click on the TCPA title sorts out the targets by TCPA values.

ECDIS900 acquires targets via serial line from ARPA radar connected to the system or using
MK radar interface kit. In addition, ECDIS receives by serial line the targets from AIS when AIS
is interfaced to ECDIS.

Center the chart and access properties

•

Double click on the target name to center the chart on the target.

•

Right click on the target’s name to access to target’s properties.

Show and hide targets

Press 

Hide target

 to hide the targets. All targets are hidden except the target on CPA/TCPA

alarms which will always been displayed.

Relative vector

Press the 

Draw relative vector

 button to display the targets with relative vector. The

relative vector is displayed with a dotted line to make a difference with the absolute vector.

AIS server

This function is dedicated Norwegian Pilots and allows connecting to AIS server providing
the AIS traffic around Scandinavia.

Create a sensor called Client AIS Server using the Sensor Monitor application, start and stop
the display of AIS data in ECDIS using the button 

Start

 or 

Stop AIS server

.

Radar

| ECDIS900 Operator Manual

129

Summary of Contents for Maris ECDIS900















































































































































































































Reviews:

No comments

Related manuals for Maris ECDIS900

Targa Mobile User Manual And Service Information preview
Mobile
Brand: Targa Pages: 113
NaanDanJain Dan Fogger Manual preview
Dan Fogger
Brand: NaanDanJain Pages: 12
Caliber MPD 109 Manual preview
MPD 109
Brand: Caliber Pages: 28
Xtrons D713GDAB User Manual preview
D713GDAB
Brand: Xtrons Pages: 24
Johnson Controls tyco DS-1 Series Manual preview
tyco DS-1 Series
Brand: Johnson Controls Pages: 10
Reliable N25 Quick Start Manual preview
N25
Brand: Reliable Pages: 4
GUDEL Memolub PLCD Service Manual preview
Memolub PLCD
Brand: GUDEL Pages: 36
Sune Technology QPI BM16 3S Installation Manual preview
QPI BM16 3S
Brand: Sune Technology Pages: 10
Sanyo NVM-4370 Instruction Manual preview
NVM-4370
Brand: Sanyo Pages: 42
Sanyo NVM-4050 Instruction Manual preview
NVM-4050
Brand: Sanyo Pages: 40
Sanyo NVM-4030 - Easy Street - Automotive GPS Receiver Instruction Manual preview
NVM-4030 - Easy Street - Automotive GPS Receiver
Brand: Sanyo Pages: 41
Sanyo NVM-4070 Instruction Manual preview
NVM-4070
Brand: Sanyo Pages: 45
Viking MICROMATIC VK106 Technical Data Manual preview
MICROMATIC VK106
Brand: Viking Pages: 8
Viking VK482 Quick Start Manual preview
VK482
Brand: Viking Pages: 19
Hyundai Mobis AT240A9AN Quick Manual preview
AT240A9AN
Brand: Hyundai Mobis Pages: 42
Pyle PYLE View Series PLVWR7300 Manual preview
PYLE View Series PLVWR7300
Brand: Pyle Pages: 7
Falcon NAVI Explorer Quick Setup Manual preview
NAVI Explorer
Brand: Falcon Pages: 24
DANHYDRA K.I.S - PFU-KIS Operating Manual preview
K.I.S - PFU-KIS
Brand: DANHYDRA Pages: 8

Brands by name

Popular brands

Load more brands